Search in MDM

Bulletin

Oxygen sensore

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 8 months before #38095 by manual-mecanica
Oxygen Sensore Published by Manual-Mecanica
Hello friends of this forum as I can try the oxygen sensor of 4 motor cables QG18 Nissan if you are right and/or evil

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 8 months before #38098 by manual-mecanica
Manual-Mecanica response on the oxygen sensor
Hello. The 4 cable oxygen sensor has 2 that are the sensor heater and 2 signal.
You have to put a digital multimeter on 2V scale in the signal pins and you have to oscillate the tension between 0.1 and 1V or 1.2V. I do not know exactly that sensor but in general they are all similar.
I hope it serves you.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 8 months before #38123 by manual-mecanica
Manual-Mecanica response on the oxygen sensor
Indeed with a multitester Cheka the values ​​which do not know of that type but you can download it on the web what I can tell you is that they must have a fixed value or as an example 1.3 .. If the value goes up and down as crazy in the tester it means that this bad is

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 8 months before #38124 by manual-mecanica
Manual-Mecanica response on the oxygen sensor
Sony33. This is not what you said.
The voltage should range between 0.1 and 1v or a little more on some models. Oscillates at a rate of 7 times per second among those values. When it is defective, it is generally fixed in some value.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
12 years 8 months before #38129 by manual-mecanica
Manual-Mecanica response on the oxygen sensor
These vehicles are Japanese here in Peru that Nissan Ad Station Wagon Motor QG 18 of A {ño 2004 have arrived the fault code says that it is 4 cable oxygen sensor I want to know exactly if it is sensor and/or it is cable lines ...... and the two signal should have the same voltage ....... I will appreciate it.

Please connect or create account to join the conversation.