Nissan has presented a new variant of the NV200, an isotherm and refrigerator vehicle very manageable, powerful, with reduced consumption and low cost of use and maintenance.
The NV200 isotherm and refrigerator are made on the basis of the NV200 van with a double rear swing door and sliding side door, have an interior lining composed of molded polyester and polyurethane panels of high strength and a siphon evacuating siphon of front fluid. Standard versions can optionally include a second rear siphon, essential for fish transport. This second siphon is standard in the UPPER versions, also equipped with an aluminum floor protector and a dike against the rear overflow.
The load space of the NV200 isotherm is 2.2 cubic meters of capacity. The interior space has a length of 1.73 meters by 1.24 wide and 1.15 high. The width between the wheel steps is 1.07 meters. The full weight of the adaptation of the isotherm module is 149 kilos.
The Nissan NV200 also offers the possibility of riding the Carrier Neox 100 electricity units, to maintain a cooling temperature up to 0º and Delphi Diavia Rolle 2000, a freezing unit that maintains the camera up to -10º. All NV200 have an external connection of 220 volts to keep the load at the desired temperature with the engine off. These transformations when marketed directly by Nissan will have a 3 -year guarantee.
Versions of the Nissan NV200 isotherm and refrigerator
The NV200 isotherm is offered in two motorizations, both based on the efficient unit 1.5 DCI of Nissan and with 90 and 110 hp of power respectively.
The offer consists of ten versions, three with the 1.5 DCI engine of 90 hp and seven with the most powerful of 110. Nissan offers two finishes; Standard and Upper, both available with the two motorizations in isothermal version and for the refrigerator versions, only with the 110 hp engine of power.
Nissan NV200 versions assemble airbag series for the driver, air conditioning, radius with Bluetooth system, electric windows and centralized closure. The UPPER finish adds electrically adjustable rearviews, fog lights, cruise speed control, passenger airbag and electronic stability control Esp.
The NV200 isotherm meets all the legal and regulatory requirements for this type of vehicles at European level, including obtaining the authorization of transport of perishable products (ATP).
Franco Factory of the NV200 isothermus factory starts at € 19,344 euros of version 1.5 DCI of 90 hp with standard finish. With the Upper finish, the price is € 20,994. The 110 hp engine has an overpricing of only 500 euros while the rest of the versions depend on the price of the chosen refrigerator equipment and the finish of the vehicle.
