Motor does not start

Hello Friends of MDM I open this topic regarding a fault that I have with a Chrysler Shadow 1989 that does not start. It turns out that I stop suddenly and I don't start .. there is gasoline and there is a spark leaving the coil when starting it. But when trying in the spark plug cables there is no spark. I already changed the cables and nothing ... The Rotor ET in good condition and the distributor's lid equal. I await your help

Hello friend to have checked if the distribution is well open, it could be that the belt is a bit lazy and a tooth has been skipped (which coincide the marks on the pimp of the crankshaft and cams) and there is checking the ignition order if the rotor is pointing on the distributor's cover, in the corresponding cylinder (the one that is in compression). If you have a spark and the benzine pump works well, the distribution is well open and the ignition order is correct should light without problems

.

Well, all that is fine ... but I insist ... there is a spark leaving the coil to the distributor ... but it does not reach the spark plug cables.

Platinum and condenser did you check?

It is electronic on hall effect