SEAT AROSA WATER PUMP

Hello friends:
I have a Seat Arosa 1.4 Iny.
45000km
Clean radiator.
Does not lose water.
I have the radiator fan in an interruptting and I start it when starting.
I have no thermostat.

The temperature passes from 90º when rising a slope.
It is almost certain that it is the water pump.
I have a podium to verify that the superior water sleeves are very hot
without embargoing the sleeve that enters the radiator at the bottom is cold.
Question:
I can release the water pump without having to completely remove the district strap.

What I want is simply to change the pump and put it on the brands I would do on the belt.

There is some manual for this car (free)

Greetings from Tenerife

Hi Nicolas, you can change the pump without disassembling the belt completely, marks well the position of the gears to be able to assemble without varying the point, as for the manual proba in these pages, ClubDelseat.com, Booktaller.net, automecanico.com and redtecnicaautomotriz.com, you have to register but it is easy and free, I hope it will help you, a hug.

Download the CD Self -driver that there is everything how the distribution is put, there you will not have problems ,,,hh

Thanks friends
solved
, leave the distribution strap quite marked
and so remove the water pump.
Grace was the cat under the engine to lower it
and thus take the pulley