X-TREIL 2005 Up and RPM lower

Ice the tuning and then took the X-Treil pressure and then used it 40 minutes and when they turned on and uploaded the RPM from 1500 to 2000 and turned on the check-forward but the scanner does not detect any codes if it accepts the protocol and gives all the functions but does not detect codes already scan in three different parts and in all it does the same thing.

Look probably the sensor that measures the crankshaft turn has a ground short or in its case of Aiga damaged with the water you can check the sensor that carries in the detainee ring of the transmission and the instrument board to discard it also check the computer connections in case they do not have moisture.


I hope the information helps you somewhat.

Your problem is something easy the acceleration position sensor was barely