DISASSEMBLY WATER PUMP GALLOper 2.5 TD

Good night to all. I have to extract the water pump from my Hyundai H1 Motor D4BF engine, which is the same as the Galloper 2.5 TD. I have the doubt of whether or not it is necessary to disassemble the distribution straps to be able to remove the bomb screws and be able to take it out. In view of the Galloper workshop manual, it is not very clear to me.

Look friend try to see if the screws come out like this, if they do not come out, take out the distribution strap, have your own brands so that you have no problems to mount it,

Hello, you have to have the following: Coe the upper dead point in the ratist N 1 You take out all the plastics you will have to take out the Damper (crankshaft pulley, you take out the 4 bolts and spindles two bolts with the same thread but more lakes and with them you take the damper damper pulley of crankshaft) take an electrical cable of 1.5 diameter with plastic and tie the distribution strap. replacing the tensioner and this one you take it out. The BBA. You are free to get (to put the spring of the tensor the part that goes in the tensioner's leg with a tube pedey of 8 or 10 m/mo forces to fit it) I hope you result to me it finds it quickly and comfortable I hope it serves you Chao