Search in MDM

Bulletin

Opel Combo 1.3 does not start

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 9 months before #47163 by manual-mecanica
Opel Combo 1.3 does not start with Manual-Mecanica
Hello good night to all.
I have an Opel 1.3 cdti van that stops it on Monday and now it doesn't start me diesel to the ramp but I do not make intentions I turn on the motor light
please help
greetings

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 9 months before #47164 by manual-mecanica
Manual-Mecanica response on the Opel Combo 1.3 theme does not start
Hello. If the engine light ignites it is that your vehicle needs to be scanned. What you can verify is whether there is a spark, fuel and good air entrance. If these three factors exist, the problem can be electric or electronic.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 9 months before #47165 by manual-mecanica
Manual-Mecanica response on the Opel Combo 1.3 theme does not start
Hello. If the engine light ignites it is that your vehicle needs to be scanned. What you can verify is whether there is a spark, fuel and good air entrance. If these three factors exist, the problem can be electric or electronic, in case you do not turn on

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 9 months before #47166 by manual-mecanica
Manual-Mecanica response on the Opel Combo 1.3 theme does not start
It places a spark plug the tip of the motor cable and lands, marches, and if it does not jump spark, it is probable distri band, crankshaft sensor, coils, wiring, fuses, relay, or ECM, your alarm or immivalizer, you have to follow the order of operation to locate the damaged component and replace it.

Please connect or create account to join the conversation.