Search in MDM

Bulletin

P2096 fault code

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 2 weeks before #49378 by manual-mecanica
P2096 fault code published by Manual-Mecanica
Hello friends of this I have a problem with Kia Rio of 2013 with 15,000 km of travel always appears this P2096 fault code ... that is catalyzer my question is how I can solve this failure that appears ....... always uses gasoline 90 and the rest of the engine is fine only appears always appears always this failure help please.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 2 weeks before #49387 by manual-mecanica
Manual-Mecanica response on the topic P2096 Failure Code
Hello, I recommend doing these reviews, low fuel pressure caused by obstructed filter, low fuel pump, stubborn or damaged fuel pressure regulator, obstructed or leaks injectors, luck

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 2 weeks before #49404 by manual-mecanica
Manual-Mecanica response on the topic P2096 Failure Code
Thanks for the fact,
the injectors I did the test with ultrazonid and is very well correct the only one can be as you explain the fuel pressure regulator I imagine it carries inside the tank, in the entry of a rail of injectors there is no return of fuel, there is only a pipe pipe to the rail.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 2 weeks before #49407 by manual-mecanica
Manual-Mecanica response on the topic P2096 Failure Code
Measure the fuel and flow rate ... Keep in mind escape tube leak ...

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
10 years 1 week before #49448 by manual-mecanica
Manual-Mecanica response on the topic P2096 Failure Code
Normal as a flow and pressure should carry ....... Thank you for your help an estimated hug

Please connect or create account to join the conversation.