Mazda BT 50 Power Loss and RPM

Friends My Mazda BT 50 year 2008 with 130,000 km began to lose power the RPM do not rise from 2500 and sucks, after several accelerated in empty sometimes it uncovers and raises more rpm but does not pass the 110km/h. The scanner courage injectors, and bought new and charis, oil filters, oil, sewage, EGR valve, crankshaft sensor were changed, the turbo was checked, the turbocharged radiator, heating or new spark plugs was cleaned, etc. The scanner no longer throws anything and continues like a turtle.

Hello, it measures the pressure of the high pressure pump directly at the exit of it, it also checks the pressure on the injection rail, if the pressure of the pump is within parameters, it is likely that you have a problem with the pressure regulator of the rail.

Hello Emonroy, make your suggestion and this works well, because now I have removed the Catalitical and was quite dirty, now it goes up of revolutions in a normal way and reaches up to 140km per hour nothing more, in short it is already acceptable.
Now it started to get very loose to start with the key, but when you push it a few meters away. Start and spark plugs are checked are new. Please help.

Dear I wanted to know if I can solve the issue of power and RPM, the same thing happens with my BT50 Mazda.

Rikorn7 wrote: Hello Emonroy, make your suggestion and this works well, because now I have taken the Catalitical and was quite dirty, now it goes up from revolutions in a normal way and reaches up to 140km per hour nothing more, in short it is already acceptable.
Now it started to get very loose to start with the key, but when you push it a few meters away. Start and spark plugs are checked are new. Please help.