Pneumatic centralized closure

Hello, I have a Cordoba of 98 and when I install the spy alrma I have had a problem with the closure when you have connected the alarm has sizzled a closing hug and now it does not work or put the key.

I have disassembled the compressor and putting direct current if it works.

What can happen is there any fuse by some site?

Thank you

Check the fuses of the car and control the connection scheme of the possible alrama you connect a cable to speed, it can be a supply cable or centralized closure

Well I already resolved the theme of the closure was a molten fuse.
Now the problem is not acting well.

The problem is installing a spy LC211a alrma.

My car has a pneumatic closure which I put the jumper in that position.

According to the scheme it is orange and white/black together, yellow earth, yellow/black +12 positive battery, we have white that I have purchased that with the alrma set da 0v and when removing it 12V and the orange/black that gives 0v always.

Now in the car I have 3 red/blue cables 0V Open closure 12v closed, continuously and red/green red/green Cirre 0V closed.

Could someone be for me with all these data how to put them?

What I see weird is that by connecting the alrma, no 12V cable so it may not work for me.

Everything else has already connected.

Forgive for the tocho but I give all the data.

Thank you

José