Hyundai Getz Gls fuses

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

15 years 8 months before - 15 years 8 months before #9653 by manual-mecanica

Hyundai Getz Gls fuses published by Manual-Mecanica

Hello everyone, I am new here and it is my first post : HUH:

, I hope to hit the place where to write my doubts. You will see ... It turns out that I already changed a fuse of my vehicle, that of the lighter, well a classmate really changed it, taking them out all and looking at one who was the one that was broken.

My problem now is that : S

I changed the position of the left lighthouse position a few days ago because a G.Civil told me, and today another G.Civil, he told me that I have the short-range light of the same molten site H-4 lamp it works in long reach but I do put the crossing no. (I have been looking at the function of the H-4 and it is that of short-range light or crosses and the long range, if I am wrong to correct me).

I suspect that it can be for some fuse and the kit of the matter is that if it is for any fuse , they will tell me what it is and incidentally indicates that each one belongs , because I do not find anywhere the meaning of each designation , : Woohoo:

and it is not that it is easy to understand it.

Thanks in advance to all who help.

Latest edition: 15 years 8 months before by .

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

15 years 8 months before #9656 by manual-mecanica

Manual-Mecanica Answer on the Re: Hyundai Getz Gls fuses

Friend first of all, well benido to the forum, look I have a question you changed the H-4 This lamp has the low and high lights but are burning separately since it has two filaments inside, when there is a problem of lights in a vehicle first Chekea that the blister or lamp this in good condition, an easy way to do it is to put it on the side that works and now, now after rule out that it is in good condition and that it reaches the connector, Start to check fuses and things, but there are no fuses for a single light, that is, a low light and a fuse only for that, generally the fuses command a high and low lad warn and help you if you do not solve the problem but I think it's something like that as a burned blister.

Please connect or create account to join the conversation.

Manual-Mecanica
Author of the subject
Offline
Fresh Boarder

Further

15 years 8 months before - 15 years 8 months before #9664 by manual-mecanica

Manual-Mecanica Answer on the Re: Hyundai Getz Gls fuses

Thank you Kikemec, I made the change of the lamp and indeed, it turns out that I also put one of the broken filaments ..., Yata changed it again for one in good condition and Wala works perfectly. File of above crossing light or short range, filament below the long range.
filaments

I only lack the fuses, know what each fuse belongs, the photo I put previously is that of my hyundai, I am not in a hurry because this morning I look at the state of all the fuses and they are all fine, but it is in case something fails tomorrow.

THANK YOU

Latest edition: 15 years 8 months before by .

Please connect or create account to join the conversation.