Search in MDM

Bulletin

Chevrolet Corsa 1.6

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 6 months before #29353 by manual-mecanica
Manual-Mecanica Response on the Re: Chevrolet Corsa 1.6
Hello, how are you ??? Look, check the water storage cover ... because it has pressure valves and sometimes fuck (as long as the electros get on and the joint is not shit)) Luck ... comments what happened ...

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
13 years 5 months before #29394 by manual-mecanica
Manual-Mecanica Response on the Re: Chevrolet Corsa 1.6
In general, everyone is right, but if you want the vehicle not hot so much, a parallel installation can be made, that the fan is going to go to you if you want to do it, without ocaring the ECU so as not to cause extra damage, and turn on and for just you have no button or anything.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
8 years 3 months before #52098 by manual-mecanica
Manual-Mecanica Response on the Re: Chevrolet Corsa 1.6
Hi San Kpk! From my experience you must replace the temperature sensor that is located in the back of the cylinder cover, under the high voltage coil, I had several cases in which this sensor (bulb) is extended by rank by emitting an erroneous signal to the computer that governs the operation of the electro fan and therefore recalientes, greetings. Luis.

Please connect or create account to join the conversation.

  • Manual-Mecanica
  • Author of the subject
  • Offline
  • Fresh Boarder
  • Fresh Boarder
Further
8 years 2 months before #52145 by manual-mecanica
Manual-Mecanica Response on the topic Chevrolet Corsa 1.6
Hello friend regarding the temperature of Corsa 1.6 Something that happens is that Lamanguera that is at thermostat out

Please connect or create account to join the conversation.